Reboot:


1. Press and hold the Yellow + Blue button then press the Esc button on the lower front of the device.



_________________________________________________________________________________

_________________________________________________________________________________

 

Factory Reset:

*This option will remove the S2K icon from the desktop.


1. Remove the battery and locate the Reset button.



 

2. Hold the Scan button on the front of the device and press the reset button for 2-3 seconds.



3. Insert the battery back into the device.

4. Power up the device.


*Please click here for instructions on how to place your S2k icon onto the desktop.

_________________________________________________________________________________

_________________________________________________________________________________

 

Clean Boot: 

*This option requires S2K to be reinstalled by our technical department.


1. Remove the battery and locate the Reset button.




2. Hold the Scan button on the front of the device and press the reset button for 2-3 seconds.




3. Insert the battery back into the device.

4. Power up the device.

5. Then promptly press and hold the Esc and 0 button after pressing the power button. 

(you will get a clean boot confirmation window)




6. Press either one of the ENT buttons to confirm a clean boot. 

(the process takes about 30 seconds, you will only see the confirmed message on the screen)




7. When prompt, follow the instructions to calibrate your stylus pen.


*Clean boot process is complete, please contact S2k for installation and configuration.

_________________________________________________________________________________

_________________________________________________________________________________